How To Fix A Drone Propeller That Won't Spin

How to Fix a Drone Propeller That Won’t Spin (Details Guide)

I was excited to fly my drone after a long time, only to find one propeller acting up. 

It spun sluggishly, like it had lost its zest for flying. I checked the battery and connections, but everything seemed fine.

Frustration crept in as I tried different fixes. My hands were fumbling with tiny parts. I thought, Why is this happening? 

People who fly drones or are connected with the drone community know what I am talking about. 

That day I somehow managed to solve the spinning issue. However, I knew the same problem was going to come back. So, I needed to be prepared. 

And today is all about the solid 7 months of my detailed experiments, professional reviews, and technical hacks. 

I am here to share with you guys how to fix your drone’s propeller that won’t spin properly.

So without further ado, boys, let’s get straight into it.

Why Isn’t Your Drone Propeller Spinning? 6 Possible Reasons

Reason 1: Motor Dysfunction

If your motor is not working well then it can be caused by different things that stop the propeller from moving.

This could include the motor getting worn out because it’s been used a lot, something blocking it or causing damage, or the wires inside the motor coming loose.

Reason 2: Battery Challenges

If your battery is out of juice then your propeller will not spin. 

Even if your battery has juice, chances are that the health of the battery is weakened, and the propellers may not function properly.

Reason 3: Wiring Complications

Sending power to the motor can become tricky if the wires aren’t connected properly. If there are problems with how the wires are set up, they can stop electricity from reaching the motor. 

So if the motor is not working then the propellers aren’t spinning.

Reason 4: Propeller Impairment

When the propellers are broken or bent, they can’t spin properly.

To make sure they work well, it’s really important to check them regularly for any signs of getting worse or getting physically damaged.

Reason 5: Electronic Speed Controller (ESC) Malfunction

This is the part that controls how fast and strong the motor works. If the ESC is not working right, the motor can stop working.

When the ESC breaks, it messes up the signals that tell the motor what to do, and that’s why the propeller doesn’t spin properly. 

Reason 6: Flight Controller Anomalies

The flight controller is really important because it tells the ESC and motors what to do.

So, if the flight controller isn’t working well, it changes the instructions that go to the motor, which makes the propeller not work as it should.

10 Easy Ways You Can Diagnose The Drone Propeller Spinning Problem

Ways You Can Diagnose The Drone Propeller Spinning Problem

1. Visual Inspection

Look closely at your drone’s propellers, the small spinning blades. Check if they are damaged, bent, or have anything stuck in them. 

Also, check the motor, because it is like the engine of your drone, and make sure no wires are hanging loose.

2. Check Battery

The battery is the heart of your drone. Make sure it’s fully charged and connected properly.

If the battery is low on power, then it might not be able to make the propellers spin properly.

3. Motor Sound

When you try to take off your drone, always listen to the sound the motor makes.

If it sounds weird, like buzzing or grinding, it could mean something is wrong with the motor.

4. ESC and Flight Controller

You can connect your drone to a computer or an app to see if the electronic speed controller and the fight controller are getting the right signals and working correctly or not. 

5. Motor Response

If your drone has multiple propellers, see if they all start spinning when you try to take off.

If one or more propellers don’t spin while the others do, then there might be a problem with that motor.

6. Software Check

Just like your phone or computer needs updates, your drone’s software does too.

Make sure your drone’s software is up-to-date. Sometimes, if it’s not, it can cause problems with how the motor works.

7. Swap Propellers

If you have extra propellers, try switching them around between different motors. See if the problem moves to a different motor.

This helps you figure out if the problem is with a specific propeller or motor.

8. Inspect Wiring

Check the wires that connect the motor, ESC, and flight controller. Make sure they are plugged in the right way and not broken.

Wires that are not connected properly can stop the motor from working.

9. Test Different Environment

Sometimes, things like Wi-Fi signals or other electronic devices can interfere with your drone.

Try flying it in a different place to see if that makes any difference.

10. Professional Help

If you’ve tried all these steps and still can’t make the propellers spin right, then I suppose it’s time to ask for real help.

Reach out to drone professionals, like a repair person or the company that made your drone. 

They can give you more advice or fix the problem for you.

How to Fix Your Drone Propeller: a Step-by-step Guide

How to fix Your Drone Propeller

Step 1: Safety First

Before we jump into fixing your drone propeller, prioritize safety. Choose a well-lit and clutter-free workspace

Make sure the drone’s battery is disconnected to prevent any accidental starts. Remember, safety is essential.

Step 2: Get Your Tools

Let’s get the tools you’ll need ready:

  • Replacement propeller(s)

Order the correct propellers for your drone model.

  • Screwdriver:

Look for one that fits the propeller screws snugly.

  • Small wrench (if needed)

Some drones need a wrench for propeller removal.

  • Cleaning cloth

Useful for wiping down the propellers.

  • Adhesive tape (if required)

In case of minor cracks that need temporary fixing.

  • Patience and a steady hand

Essential throughout the process.

Step 3: Identify the Problem

Inspect your drone’s propellers closely. Is there visible damage, bending, or a missing propeller? 

Identifying the issue accurately is the first step toward finding the solution.

If it’s just a loose propeller, move on to Step 4.

Step 4: Removing the Damaged Propeller

Grab your screwdriver. Carefully start removing the screws holding the damaged propeller in place. 

Set the screws aside in a safe spot.

Gently detach the damaged propeller from the motor shaft. This might take a bit of wiggling. Keep the screws as you’ll need them shortly.

Step 5: Attaching the Replacement Propeller

Unbox your brand-new propeller. Make sure it’s the correct type for your drone model. Line up the propeller with the motor shaft carefully.

The propeller should fit smoothly onto the shaft. Begin securing the propeller by gently tightening the screws you removed earlier.

Remember, it’s important not to over-tighten. It’s enough to keep the propeller securely in place.

Step 6: Balancing Act

Balancing your propellers is very important for optimal performance. Hold the drone horizontally and spin each propeller one by one.

If any propeller appears wobbly or uneven, it needs adjustment. 

Gently bend the propeller blades until they spin smoothly without wobbling. These small adjustments can significantly enhance your drone’s stability in flight.

Step 7: Dealing with Bent Propellers

For a bent propeller, follow these steps:

  • Remove the damaged propeller using the method in Step 4.
  • Lay the propeller on a flat surface and apply very gentle pressure to straighten it.
  • Be cautious not to apply excessive force that might break the propeller.
  • Reattach the propeller, as I mentioned in Step 5.

Step 8: Handling Missing Propellers

If a propeller is completely missing, you’ll need to install a new one. Follow the steps in Step 4 and Step 5 to attach a replacement propeller.

Step 9: Maintenance and Preventive Care

To keep your drone propeller in great shape:

  • Routinely inspect and tighten screws and propellers.
  • After every time you fly your drone, use a cleaning cloth to remove dirt and debris from the propellers.
  • Store your drone in a protective case to prevent accidental damage.

Step 10: Test Flight

With your drone fully fixed, it’s time for a test flight. Head to an open area and get your drone up in the air.

Observe its behavior during takeoff, flight, and landing. If everything looks stable and controlled, Voila! you’ve successfully fixed your drone propeller.

Cleaning Your Drone The Correct Way

Cleaning Your Drone The Correct Way

1. Propellers

  • Carefully take off the propellers, following the manufacturer’s instructions.
  • Use a slightly dampened microfiber cloth to wipe away dirt, dust, and debris. 
  • Before reattaching, make sure each propeller is well-balanced. 

2. Body

  • Use a soft brush to remove any loose dirt or debris from the drone’s body.
  • Dampen a clean cloth slightly with water to wipe the exterior of the drone to remove fingerprints, smudges, and other marks.
  • Be cautious not to let any moisture enter the drone.

3. Camera and Sensors

  • Use a lens cleaning brush to remove dust and particles from the camera lens. 
  • If your drone has sensors, use a clean microfiber cloth to gently wipe them. 

4. Battery

  • Wipe the exterior of the battery with a clean dry cloth. 
  • Be careful not to get moisture on the battery’s contacts or connectors.

5. Remote Controller

  • Use a damp cloth to wipe the surfaces and buttons of the remote controller. 
  • Clean the joysticks with a gentle touch.

Test The Drone In Easy Steps

Now that you have cleaned your drone, it’s time to check if works just like you took it out of the box. 

  • Choose an open outdoor area away from obstacles.
  • Turn on the drone and the remote with good batteries.
  • Follow the manual to calibrate the sensors and compass for accurate flight.
  • Inspect propellers for damage and make sure all parts are secure.
  • Lift off gently and hover at a low altitude to confirm stability.
  • Test flying in different directions, checking the responsiveness.
  • Enable the GPS and test the return-to-home function.
  • Check if the drone maintains a steady height.
  • Test this feature very carefully.
  • Fly in different directions to make sure it’s stable.
  • Capture footage and test the gimbal movement.
  • Lower the drone gently, ensuring an even landing.
  • Monitor the battery during flight and land with ample power.
  • Look for new dirt or damage.
  • Turn off both the drone and the remote.

How Do You Keep Your Drone Safe?

  • Understand and follow local drone laws and regulations to avoid fines and accidents.
  • Before every flight, inspect your drone.
  • Fly in open spaces away from people, buildings, and power lines. This reduces collision risks.
  • Avoid windy or rainy conditions that can affect control and stability.
  • Calibrate your drone’s sensors and compass as per the manual to ensure accurate flight.
  • Use manufacturer-approved chargers and store batteries properly to prevent overheating or swelling.
  • Know how to manually land your drone if there’s a signal loss or battery issue.
  • Avoid flying near airports, government buildings, or sensitive areas.
  • Keep your drone within your sight at all times for better control.
  • Don’t invade others’ privacy by flying over private property or crowded areas.
  • Regularly update your drone’s software to access new features and ensure safe performance.
  • Avoid flying near animals, as drones can disturb them.
  • Check your drone after every flight for damage or dirt.

Wrap Up

The frustration of dealing with a drone whose propellers won’t spin properly is real. However, following the step-by-step guide can be of much help. I have tried to cover as many details as possible. 

The process begins with identifying potential issues through visual inspections and motor testing.

Remember, testing your drone after fixing it is very important. To protect your beloved drone, make sure you prioritize safety measures such as pre-flight checks, cautious flying environments, and responsible battery management.

Following these practices will guarantee you a trouble-free flying experience.

Some of our Drone Reviews and Guide you can explore:

Top Drones for security surveillance

Top Drones for farm security

Popular Posts

Behind Best Darn Product is Kevin Pena, a passionate blogger and e-commerce enthusiast based in Atlanta, Georgia. With his finger on the pulse of the ever-growing online marketplace, Kevin is dedicated to sharing his extensive knowledge and genuine enthusiasm for the products and services that shape our modern lives.

Scroll to Top